ETCANFD-USB-X1-LIN · USB Bus Interface

USB to CAN FD + LIN.
One adapter, zero drivers.

A galvanically isolated USB interface with one CAN FD channel and one LIN channel on a D-Sub 9. Driverless on Windows, native SocketCAN on Linux, and four switchable firmware personalities — from bench sniffing to gateway duty.

8 Mbit/sCAN FD data rate
1 µshardware timestamps
8,000frames / second
ISOgalvanic isolation

Features

Serious tools, not dongle compromises

Hardware features and a software ecosystem built for daily engineering work.

CAN FD

Full CAN FD, done right

CAN 2.0A/B and CAN FD (ISO 11898-2). Up to 1 Mbit/s arbitration, 8 Mbit/s data point-to-point, with independent sample points for both phases.

LIN

LIN master & monitor

One LIN 2.x channel up to 20 kbit/s, classic or enhanced checksum per frame, powered from an external 8–18 V rail on pin 9.

ISOLATION

Galvanically isolated

The CAN interface is galvanically isolated from USB and your PC — ground loops and transients stay on the bus side.

TERMINATION

Software 120 Ω

Switch the CAN terminator from the PC — no jumpers, no opening the case. Off at power-up; optional firmware remembers your setting.

TIMING

1 µs timestamps

Every frame is timestamped in the adapter hardware, so your logs survive USB latency and busy hosts.

MODES

Listen-only & loopback

Normal, listen-only, loopback self-test and single-shot transmit modes for bench work and ECU development.

FIRMWARE

Four personalities

Switch between GS-CAN, GS-CAN + LIN, SLCAN (COM-port) and LIN-only firmware with the bundled updater — one adapter, many toolchains.

SOCKETCAN

Native Linux support

GS-CAN firmware speaks gs_usb: plug in and the adapter appears as a SocketCAN network interface. Windows needs no driver either.

SDK

SDK & GUI included

Cross-platform PC application plus SDK for C#, Java, LabVIEW and Python — with a CAN bit-timing calculator in the box.

Specifications

Technical data

ETCANFD-USB-X1-LIN — the current model, G47X hardware platform.

CAN1 × CAN FD / CAN 2.0A/2.0B · ISO 11898-2 · arbitration up to 1 Mbit/s · data up to 8 Mbit/s point-to-point (5 Mbit/s multi-node) · host-selectable sample points
CAN modesNormal · listen-only · loopback self-test · single-shot transmit · hardware timestamps at 1 µs resolution
TerminationSoftware-controlled 120 Ω · off at power-up · optional termination-memory firmware restores state
LIN1 × LIN 2.x · master and monitor modes · up to 20 kbit/s · classic / enhanced checksum per frame · external 8–18 V bus supply (D-Sub 9 pin 9)
IsolationCAN interface galvanically isolated · isolated from USB and PC ground
Host interfaceUSB 2.0 Full Speed · driverless on Windows · native SocketCAN (gs_usb) on Linux
ThroughputUp to 8,000 frames/s · sustained, host-side
FirmwareField-switchable · GS-CAN · GS-CAN + LIN · SLCAN · LIN-only · updater tool included
SoftwareGUI for Windows / Linux / macOS · SDK: C#, Java, LabVIEW, Python · CAN bit-timing calculator
Bus connectorD-Sub 9 male · CANH/CANL/LIN/VBAT/GND · screw-terminal breakout and 120 Ω adapter included
Environment0–70 °C operating · individual serial number for multi-adapter setups

Family

One platform, three models

Same pinout, same software, same SDK — code you write today runs on the whole family.

AVAILABLE

ETCANFD-USB-X1-LIN

G47X · USB FULL SPEED

  • 1 × CAN FD + 1 × LIN
  • 8,000 frames/s
  • Galvanic isolation
  • D-Sub 9 + breakout in box
COMING SOON

ETCANFD-USB-X2-LIN

G47X · USB FULL SPEED

  • 2 × CAN FD + 2 × LIN
  • Two isolated domains
  • 2 × D-Sub 9, same pinout
  • Existing cables fit
COMING SOON

ETCANFD-USB-X2-LIN-PRO

H7X · USB HIGH SPEED

  • 2 × CAN FD + 2 × LIN
  • 20,000 frames/s
  • High-Speed USB headroom
  • For loaded-bus recording

Applications

Where it fits

From a laptop on the bench to a rack of test fixtures.

ECU development & flashing Bus analysis & logging CAN FD ↔ LIN gateways EOL / production test Body electronics (LIN) simulation Fleet diagnostics Protocol research & education SocketCAN / Linux tooling

Available now

Order the X1, reserve the X2

Volume pricing, OEM branding and cable/harness options — tell us about your project.